Configuring The Protocol Settings - McAfee WebShield e500 Installationshandbuch

Installation Guide — English

Configuring the protocol settings

When you have configured the appliance's network
settings (see
appliance's protocol settings (step 4).
This section describes the steps for configuring the
protocol settings. We recommend that you read them
before performing the actions, to ensure that you
know what is required.
If you have already gathered the required
configuration information (see
configure the appliance more quickly.
Step 5 — backing up the appliance's settings — is
described on
Tasks
This section is divided into the following tasks that
you must perform in order:
1. Configuring the appliance's protocols; see
2. Configuring the automatic updating feature, so
3. If necessary, configure your firewall, mail
4. Testing your configuration, to ensure that it
ENG - 40
page 32), you are ready to configure the
page 55.
41.
that the appliance keeps its virus definition
(.DAT) file and scanning engine up-to-date,
maintaining full anti-virus protection; see
47.
server, web cache and other equipment to route
protocol traffic through the appliance; see
48.
scans inbound and outbound traffic correctly
for infections; see page
page 18), you can
page
page
page
50.
McAfee WebShield e500 Appliance version 2.5
1
Gather the
configuration
information
2
Install the
appliance
3
Configure the
appliance's
network settings
4
Configure the
appliance's
protocol settings
5
Back up the
appliance's
settings