McAfee WebShield e500 Installationshandbuch Seite 49

26. To change the password, type the new password in the Password text
27. Click Apply all changes.
28. Click Restart now.
29. When the appliance has restarted, click the URL hotlink or use one of the
Installation Guide
box, then retype it in the Confirm text box. Click Set now.
IMPORTANT: For security reasons, we strongly recommend that
you change the default password now (when configuring the
appliance for the first time).
The web browser sends your changes to the appliance. The user interface
asks you to restart the appliance's software because you have made IP
configuration changes.
The appliance restarts its software and is ready for use after about two
minutes.
The user interface displays a new URL hotlink that you can use to
re-access the user interface with the new IP address.
other IP addresses that you have configured for the port through which
you are managing the appliance. If you were using the LAN2 port but
chose to disable its IP address
across the network.
When you have logged on, the System Status page appears with a
navigation bar on the left. You can now configure the appliance's
protocol settings; continue with
page 40.
Installation Guide — English
(Step 17 on page 37), access the LAN1 port
"Configuring the protocol settings" on
ENG - 39