Restoring And Upgrading The Appliance's Software - McAfee WebShield e500 Installationshandbuch

3. In the File or URL text box, specify the full path or URL for the
4. Click Restore now.

Restoring and upgrading the appliance's software

If there is a problem with one of the appliance's hard disk drives, you can
replace it with another drive (of the same specification) while the appliance is
operational, and the appliance copies the image from the existing drive to the
replacement drive; see
However, there might be circumstances where you need to restore the
appliance's software to both of the appliance's drives. This is an unlikely
situation but it can occur if you remove both drives from the appliance at the
same time. The restoration process requires the WebShield e500 Appliance
recovery CD.
You might also receive a WebShield e500 Appliance upgrade CD from your
support representative, which contains improved software for the appliance.
You upgrade the appliance's drives from this CD using a similar method to the
restoration process.
Installation Guide
configuration files. Examples:
c:\myfiles\ws_cfg_backup.zip
http://www.myorg.com/myfiles/ws_cfg_backup.zip
You can click Browse to locate the file.
The web browser opens the configuration files, and sends the settings to
the appliance. You can now continue managing the appliance.
page
NOTE: You must connect to the appliance locally when restoring or
upgrading its software. You cannot perform the restoration or upgrade
remotely.
When restoring the appliance's software, the restoration process removes
any additional software that you might have installed. If you are using
ePolicy Orchestrator with the appliance, you must reinstall the ePolicy
Orchestrator agent after the restoration process; see the Configuration
Guide.
61.
Installation Guide — English
ENG - 57