Ports And Connectors - McAfee WebShield e500 Installationshandbuch

Installation Guide — English

Ports and connectors

The appliance's ports and connectors are shown on
guide). The installation steps on
equipment to the ports.
These ports and connectors are described below.
Two hard disk drives
A
Both drives are 17.4
RAID 1 (mirror) configuration. They mirror the appliance's operating system
and data processing, ensuring seamless operation in the unlikely event of a
problem with one of the drives (indicated by a red LED on the drive).
The drives are in caddies, allowing you to replace a faulty drive while the
appliance is operational. The replacement drive is imaged automatically from
the existing drive; see
CD-ROM drive
B
The CD-ROM drive is used for restoring and upgrading the appliance's
software, and must not be used at other times; see
ENG - 14
NOTE: We might change the physical appearance of the appliance at any
time during manufacture. For this reason, the locations and types of the
ports and connectors on your appliance might be different from those
shown in this guide. If the changes are substantial, refer to the
accompanying Release Notes for new information.
"hot-pluggable" SCSI hard disk drives, managed in a
GB
"One hard disk drive LED is red" on page
page vii
page 28 describe how to connect your
Step 4 on page
McAfee WebShield e500 Appliance version 2.5
(at the front of this
61.
58.