McAfee WebShield e500 Installationshandbuch Seite 29

Network addresses
Supply the TCP/IP network address information for the appliance:
LAN1 port IP address
and subnet mask
LAN2 port IP address
and subnet mask
Local DNS server IP address
Default gateway or router
IP address
Internal networks
Supply the domains or IP addresses for the internal networks (inside your
organization) with which the appliance communicates. You can identify as
many internal networks as you want (spaces for 10 networks are provided
below):
Network
Example 1
Example 2
Example 3
1
Installation Guide
NOTE: You can configure multiple IP addresses for the LAN1 and LAN2
ports.
For previous versions of the WebShield appliance, the LAN1 port was
known as the data port, and the LAN2 port was known as the management
port. Therefore, you might see such references in existing documentation.
NOTE: Remember to include the domain in which the appliance is
located, unless you want that domain treated as an external network.
Domain, or IP address and subnet mask
myorg.com
192 .
255 .
*.myorg.com
.
TCP/IP address
.
.
.
.
.
.
168 . 1 .
255 . 255 .
. .
Installation Guide — English
. .
. .
. .
. .
. .
. .
0
0
ENG - 19