McAfee WebShield e500 Installationshandbuch Seite 53

Configuring the e-mail (SMTP) delivery methods
If the e-mail protocol is enabled (the default setting), you must configure the
delivery methods that it uses.
This section only provides the information necessary to set up the e-mail
delivery methods, so that the appliance can start scanning and delivering its
traffic. There are many pages of features associated with this protocol;
for details on configuring those pages, view their Help topics by clicking Help
To configure the e-mail delivery methods:
1. In the navigation bar, select E-mail Delivery.
2. In the Methods Used panel, select the required delivery methods
3. If you selected the Local domains delivery method, click Local
Installation Guide
buttons; see page 54.
(see "E-mail (SMTP)" on page
Domains, and specify the mail relays in the panel that appears. You can
specify as many mail relays as you want (see
domains" on page
The mail relays route e-mail messages destined for specific domains
(such as myorg.com) to their relevant mail servers (such as
mail1.myorg.com). To add a mail relay, click Add, then specify the e-mail
domain and host (mail server) in the Add dialog box that appears. Click
OK to add it to the Local Domains list.
TIP: The appliance tries the mail relays in order. If one of the relays
is successful for a message, the others are not attempted for that
message. Therefore, use the Move up and Move down buttons to
position the relays in the order that you want them. Put the most
frequently used relays at the top of the list.
25).
25).
Installation Guide — English
"Locally configured
ENG - 43