Power And Safety Information; Power Requirements - McAfee WebShield e500 Installationshandbuch

Power and safety information

Power requirements

• Ensure that the power cord is suitable for the country of use. If it is not
suitable, contact your supplier. Do not attempt to modify the power cord.
• The power outlet to which you connect the appliance must meet all
applicable electrical standards for the country of use.
• When connecting the appliance to the power outlet and other equipment,
ensure that the cables are stowed or grouped safely, so that no one will trip
over them.
Using the appliance
• Do not open the appliance's case. There are no user-serviceable parts
inside.
• The appliance is heavy. When you lift it, ensure that you have a firm grip
and carry it correctly, so that you do not injure yourself or damage the
appliance.
• Place the appliance on a flat sturdy surface, such as a desk, or secure it in a
rack, such as a 19" (inch) rack. Ensure that the surface or rack can support
the weight of the appliance, and that it cannot fall.
• Do not place any heavy objects on top of the appliance.
• The appliance's network ports are only suitable for use with RJ-45
connectors. Do not use them with telephone equipment unless the socket
to which you are connecting is specifically intended for 10Mbps or
100Mbps Ethernet network use.
• In the unlikely event that the appliance encounters a hardware failure, turn
off the appliance and disconnect it from the power outlet. Contact your
supplier.
Installation Guide
IMPORTANT: To ensure safe operation of the WebShield e500
Appliance, read all of the following information carefully before installing
the appliance.
Installation Guide — English
ENG - 3