Silvercrest SBSK 5.0 A1 Bedienungsanleitung Seite 28

NOTE
► If you do not establish a connection between the earbuds
and your Bluetooth
earbuds will switch off automatically . In this case, you
will have to switch the earbuds back on before restart-
ing the pairing process .
► If the earbuds stop receiving a signal while in
Bluetooth
matically after 10 minutes .
► The next time you turn on the earbuds, they will auto-
matically connect to the last-connected Bluetooth
device . If your Bluetooth
ically reconnect to the earbuds, you will have to re-es-
tablish the connection manually . A detailed description
of how to do this can be found in the operating instruc-
tions for your Bluetooth
► If you want to connect the earbuds to another
Bluetooth
for about 2 seconds to disconnect the currently connect-
ed Bluetooth
ly, you can deactivate the Bluetooth
connected Bluetooth
and the operating/charging LED
tively orange and blue . The earbuds are now ready to
be paired with another Bluetooth
SBSK 5.0 A1
® device within 10 minutes, the
mode, the earbuds will switch off auto-
®
device, start by pressing the
®
® device from the earbuds . Alternative-
device . You will hear a beep
®
® device does not automat-
® device .
®
will flash alterna-
device .
®
GB │ IE │ NI
®
button
function on the
│ 19 ■