Object Directory; Manufacturer Specific Profile Area; Index 2000 To 5Fff - IFM Electronic ecomat100 CR2013 Gerätehandbuch

Object directory

Manufacturer Specific Profile Area; index 2000 to 5FFF

Index S-idx Designation
I/O
0
configuration
I/O
1
channel 1*
I/O
2
channel 2*
I/O
3
channel 3*
I/O
4
channel 4*
2000
I/O
5
channel 5*
I/O
6
channel 6*
I/O
7
channel 7*
I/O
8
channel 8*
PWM
2001 0
Frequency
Output
2002 0 monitoring
ON / OFF
Filter
2003 0 function
ON / OFF
*Values which cannot be assigned to the channels are not accepted.
Type Default
Number of the entries (= number of the I/O
u8, ro
0x08
channels)
0 = OFF
u8, rw 0x01
1 = binary input
0 = OFF
2 = binary output
u8, rw 0x02
3 = analog input
4 = analog output (PWM)
0 = OFF
u8, rw 0x01
1 = binary input
0 = OFF
2 = binary output
u8, rw 0x02
3 = analog input
4 = analog output (PWM)
0 = OFF
u8, rw 0x01
1 = binary input
0 = OFF
2 = binary output
u8, rw 0x02
3 = analog input
4 = analog output (PWM)
0 = OFF
u8, rw 0x01
1 = binary input
0 = OFF
2 = binary output
u8, rw 0x02
3 = analog input
4 = analog output (PWM)
Setting in Hz
0x64 Range = 20Hz to 200Hz
u8, rw
(= 100 Hz) Values below 20Hz or above 200Hz are not
accepted. The existing value remains valid.
0 = OFF
Short circuit, overload, output open (no load),
undervoltage, overvoltage or too high a tempera-
ture is neither indicated by EMCY nor by LED.
1 = ON
In the case of a short circuit, overload, output
u8, rw 0x01
open (no load), undervoltage, overvoltage or
too high a temperature on an output the corre-
sponding EMCY object is transferred, the out-
put LED flashes.
(The switching threshold for "output open" can
be as high as an output current of
900 mA).
0 = OFF
On the binary inputs
switching pulses ≥ 2 ms are detected.
u8, rw 0x00
1 = ON
On the binary inputs
switching pulses ≥ 20 ms are detected.
Input/output module CR2013
Description
29