Safety Instructions - IFM Electronic ecomat100 CR2013 Gerätehandbuch

Input/output module CR2013

Safety instructions

This description is part of the unit. It contains texts and drawings
concerning the correct handling of the controller and must be
read before installation or use.
Observe the information of the description. Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of
people and plant.
The device may only be installed, connected and commissioned by qualified
personnel.
Disconnect the device externally before doing any work on it. If necessary,
also disconnect separately supplied output load circuits.
In the case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the device can lead to considerable risks for the safety of
people and plant. It is not permitted and leads to an exclusion of any liability
and warranty claims.
Contents
Function and features
Technical data
Dimensions
Operating indicators (status LEDs)
Mounting
Electrical connection
Setup
CoDeSys PLC configuration
Electronic Data Sheet
Maintenance, repair and disposal
Declaration of conformity
Parameter and EMCY object overview
Object directory
Manufacturer specific profile area; index 2000 to 5FFF
Communication profile area; index 1000 to 1FFF
Terms and abbreviations
20
page 21
page 22
page 23
page 23
page 24
page 24
page 25
page 25
page 25
page 26
page 26
page 27
page 29
page 31
page 35