Bosch ACS 651 Originalbetriebsanleitung Seite 92

en 92 | ACS 651/751 | Commissioning
4.11 Viewing system information
¶
Press the i key.
"
The system information is displayed.
Press o or u to scroll the information screen. To dis-
miss the information screen, press the i key again.
i
The i key cannot be used to view system information
during vehicle A/C service.
|
1 689 988 238 2012-11-06
4.12 R134a record transfer tool
4.12.1 Installation
The R134a record transfer tool has to be installed on
your PC or laptop. This tool enables the transfer of
R134a record from the USB disk to a PC / laptop. The
R134a tool is made available on a CD supplied along
with the operating instructions.
Execute the following procedure to install the R134a
transfer tool on your PC / laptop.
1. Load the CD into the CD drive of your PC / laptop.
2. Double-click "setup_RBACSImport V3.0.exe".
3. Select the language for installation and click OK.
4. Follow the instructions on the screen. At the end of
the installation routine, click Finish.
"
You have successfully installed the R134a record
transfer tool.
4.12.2 Changing the language settings
The language settings can be changed by uninstalling
and reinstalling the tool.
1. Click the Start button on your PC / laptop.
2. Click "RBACSImport V3.0" → "Uninstall RBACSIm-
port V3.0".
3. Click Yes to uninstall.
4. Reinstall the tool by executing the procedure de-
scribed in chapter 4.12.1.
5. During the installation, select the required language.
"
The language setting for the tool is changed.
Robert Bosch GmbH