Bosch ACS 651 Originalbetriebsanleitung Seite 111

6.13.3 Executing recovery when the engine is OK
and the A/C system is not OK
i
After executing step 19 of chapter 6.13.1, the follow-
ing screen is displayed.
1. Follow the instructions on the screen and press E.
 The following screen is displayed.
2. Follow the instruction on the screen and press E.
 The recovery phase is initiated.
i
After the oil drain is completed, the following
screen is displayed.
Robert Bosch GmbH
Program description | ACS 651/751 | 111
3. Follow the instructions on the screen and press E.
i
The recovery phase continues till the absolute
pressure is 600 mbar. When the recovery is com-
pleted, other phases are executed automatically.
 After the filling phase is completed, the "Hose
Drain" screen is displayed.
i
If any error occurs during recovery, vacuuming or
Oil/UV dye recharge phases, the automatic mode
will not proceed to the filling phase and the "Hose
Drain" screen will not be displayed.
Caution - Risk of frostbite!
If refrigerant escapes, there is a risk of
frostbite to the hands and body.
¶
Carefully disconnect filling hoses as all
hoses can contain pressurized refrigerant.
i
See chapter 6.5.1 and execute steps 21 to 25 to
complete the service.
en
|
1 689 988 238 2012-11-06