Bosch ACS 651 Originalbetriebsanleitung Seite 83

23. Remove the service hatch on the right panel.
24. Check the shut off valves (Fig. 23, Pos. 1 and 3) on
the internal refrigerant cylinder. If the valves are
closed, turn anticlockwise and
Fig. 23: Internal refrigerant cylinder
1,3 Shut off valves
2 Manual air purge valve
Robert Bosch GmbH
4.3
1. Move the ACS 651/751 to a flat, vibration-free surface.
2. Apply the brake to prevent the unit from rolling away.
open the valves. 3. Connect the power cable to the power inlet of the
4. Connect the power cable to the mains supply.
i
1
5. Turn on the master switch.
2
3
i
6. Enter the date in
7. Enter the time. Press
Commissioning | ACS 651/751 | 83
ACS 651/751 switch-on
ACS 651/751.
The ACS 651/751 is designed for 230 volts,
50/60 hertz. Observe the specifications on the
manufacturer's name plate of the ACS 651/751.
 The self-test is initiated automatically. After the
self test is complete, the following screen is dis-
played.
When the unit is powered on for the first time, the
ACS 651/751 starts in English.
the required
E.
 A list of languages is displayed.
en
format.
|
1 689 988 238 2012-11-06