Bosch ACS 651 Originalbetriebsanleitung Seite 124

en 124 | ACS 651/751 | Maintenance
7.7 Changing printer paper
1. Turn off the master switch.
2. Disconnect the power cable from the mains supply.
3. Pull the lever (Fig. 32, Pos. 1) until the cover is
released from its locking position.
!
To avoid damage to the lever, do not apply excessive
force.
1
!
i
459897_11Nkv
Fig. 32: Opening the cover of the printer
1 Lever
4. Remove the used paper roll.
5. Insert the new printer paper roll (Fig. 33, Pos. 1)
into the compartment.
1
i
459897_10Nkv
Fig. 33: Placing the paper in the printer compartment
1. Paper roll
6. Close the cover.
!
i
Fig. 34: Closing the printer cover
"
The printer is ready to use.
i
To cut the paper correctly, pull the paper towards
the tear bar from one side to another.
|
1 689 988 238 2012-11-06
*
*
7.8 Self test
When the ACS 651/751 is powered on, a self test is
initiated automatically. It is also possible to trigger the
self test manually.
1. In the main menu, select "ACS Maintenance" and
press E.
2. Select "Self Test" and press E.
"
The self test is initiated. The following screen is dis-
played.
i
If the self test for the printer fails, contact customer
service.
i
The order number for printer paper is
F 002 DG1 450.
i
If the self test fails for any other parameter, contact
customer service.
Robert Bosch GmbH