Introduction; Product Features; Assembly; Assembling The Appliance - Cuisinart MINI PREP PRO CH4DCE Bedienungsanleitung

2. INTRODUCTION

Congratulations on the purchase of your new Cuisinart MINI PREP PRO.
For over 30 years Cuisinart's aim has been to produce the very finest kitchen
equipment. All Cuisinart products are engineered for exceptionally long life, and designed to be easy
to use as well as to give excellent performance day after day.
To learn more about our products and for recipe ideas visit our website www.cuisinart.eu

3. PRODUCT FEATURES

1. Housing base with reversible motor
2. Two control buttons for chopping
3. A 0.9 litre work bowl
4. A spatula
(not pictured)
5. A security lid for the bowl with two drizzle holes (5a)
For adding liquids during preparation.
6. A precision blade with stem for handling
Depending on the direction of rotation, the blade lets you chop or grind foods.
CAUTION! THE BLADE IS EXTREMELY SHARP.
To avoid all risk of injury when unpacking your appliance, please handle the blade with
extreme care. Never touch the metal parts and always hold the blade by the handle at
the top of its sheath.

4. ASSEMBLY

A. ASSEMBLING THE APPLIANCE
•
Place the base of the mini food processor on a flat, dry, stable surface.
•
Place the work bowl on the central stem with the handle turned to the left corner of the appliance
(see Fig.1 in the cover).
•
Turn the bowl in an anticlockwise direction locking it onto the motor base.
•
Holding the blade assembly by its stem, carefully place it over the central spindle in the work bowl
(Fig.2). Push the blade down. A 'click' lets you know that it is locked into place.
•
To remove the blade, pull the assembly firmly upwards.
CAUTION! Always hold the blade assembly by its stem. Never touch the blade, it is extremely
sharp.
CAUTION! Never place the blade directly on the motor shaft before the bowl is locked in place.
CAUTION! Always insert the blade in the work bowl before adding ingredients.
•
Add to the bowl the food that you wish to process.
•
Place the lid on the bowl. The tab of the lid should be positioned to the right of the rear column.
Turn the lid in an anticlockwise direction to lock in place (Fig.3).
N.B.: If the lid is not locked, the motor will not start.
CAUTION! Make sure the motor has stopped completely and the blade has stopped moving
before removing the lid.
•
Plug the appliance in. It is now ready to use.
(refer to cover)
(2-way rotation)
and grinding
16