THOMSON 512393 Handbuch Seite 37

960P WIFI PTZ DOME IP CAMERA
• This will detect your camera on the network
and show its IP address.
• Double-click its name to open the camera
configuration in your web browser.
Your browser will need an additional module to
display the image from your camera correctly and
will ask you if you want to install it. Accept the
request to allow your browser to display the image:
Note: Depending on which browser you are using,
the procedure may differ but the principle remains
the same: you must permanently allow the module
to run if you want your camera to work properly in
your browser.
Select the display language, then enter the username
and password for connecting to your camera. The
default username is admin and the password is left
blank, so you should leave the field empty. At the
first connection, the camera will immediately ask you
to replace the default username and password to
improve security:
D - CONFIGURATION AND USE
When you have finished changing the username
and password, you will be asked to log back in.
Once you have logged in with your new username
and password, the camera feed will be displayed:
1 2 3 4
www.thomsonsecurity.eu
6 7 8 9
5
10 11
15
12
EN EN