THOMSON 512393 Handbuch Seite 34

D - CONFIGURATION AND USE
embedded into the video of the camera.
• Network: here you have access to all of the
settings linked to network use: IP configuration,
WiFi configuration with the option of switching
the camera from a wired to a wireless
connection, ports used, email alert settings,
access to an FTP server, plug and play access
settings.
• Video: here you have access to all of the
settings linked to camera video management:
resolution, number of images per second, night
vision operation, configuration of photos taken
by the camera, contrast settings, brightness,
etc.
• Detector: here you can activate and configure
the movement detection function and the
actions to be launched if intrusion is detected.
• PTZ (compatible cameras only): here you will
find all of the settings linked to camera motor
management if it is fitted.
• System: enables you to reset the camera to 0
or restart it.
When a camera displays its image on the screen,
additional commands are displayed in the bottom
right corner:
1 2 3
This icon shows the presence of records on
1
the computer used (white when idle, green
when programmed/on
records are created)
Broadcast stopped and image closed
2
Start a recording on the disk of the computer
3
used*
Activation/deactivation
4
microphone (cameras
microphone only, your computer must provide
the speakers)
Take a photo and store on the disk of the
5
computer used*
Activation/deactivation of the camera speaker
6
(cameras fitted with the speaker only, your
computer must provide a microphone)
12
EN
u . e i t y u r e c n s s o m o t h w . w w
4 5 6
detection/manual
of the camera
fitted with the
960P WIFI PTZ DOME IP CAMERA
* For the save and capture functions to be
accessible, the disk to use must be set beforehand.
Click the System settings icon
software where to save the photos and videos on
the computer hard disk.
To view videos saved on the computer, click the
Video playback icon
10 11
1 2 3 4 5
1
Open an external video file
Quick scroll forward
2
Quick scroll back
3
Playback
Stop playback
4
controls
Progress image by image
5
Start playback
6
Pause
7
Current operating day: the coloured time
8
intervals indicate the presence of videos and
their approximate start and end times
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display
10
one or more windows and cameras
simultaneously
Take a photo from the video in playback
11
and activate/deactivate sound
Type of trigger: tick the type of recordings
12
you want to search: flat (programmed),
manual, upon movement detection, by alert
in general
Day you want to view
13
Position: enter the precise time from which
14
you want to view the video
to tell the
:
6 7 8 14 13 12
9