THOMSON 512393 Handbuch Seite 35

960P WIFI PTZ DOME IP CAMERA
To search for a video and view it:
• Click the list of cameras on the top right of the
screen or on the cameras that you wish to view.
• In the "type d'enregistrements [type of
recording]" area,
recordings that you are searching for
"date d'enregistrement [date of
• In the
recording]" area, indicate the day you want to
view
• Click "Recherche [Search]": each camera
is listed at the bottom of the screen. The
coloured areas correspond to the videos in the
computer memory:
• At the bottom of the screen, click the cameras
for which you would like to display the videos
• Use the playback controls to play, fast forward,
rewind or use the "Positionner [Position]" area
to indicate the precise time with the cursor.
To program an alert to be sent when movement is
detected, you need 2 email addresses: the address
of the sender which will be used by the camera,
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com:
sender-address@gmail.com
recipient@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To program email alerts for movement detection,
right click a camera in the list at the top right
of the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]". Then
go to "Réseau [Network]", "Paramètres messagerie
[Message settings]":
indicate the type
sends the alerts,
D - CONFIGURATION AND USE
of
1
Tick the "Activer [Activate]" box to activate
email sending
SMTP server: depends on the email provider
2
of address that sends the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider of
3
the address sending the alert. In our example
using gmail, 465
4
Security: security when connected to the email
provider. In our example using Gmail, TLS
Authentication: indicates whether connection
5
www.thomsonsecurity.eu
is compulsory (authentication) to send an
email. In our example using Gmail: Yes
(in other words: you cannot send an email
via Gmail if you are not logged into your
account).
SMTP user name: Name that you should enter
6
to log in to the mailbox that will send the
alerts. In our example using gmail, this is the
sender address: sender-address@gmail.com
SMTP password: The password used to log in
7
to sender-address@gmail.com, in our example
Sender: Enter the new address used to send
8
the alerts: sender-address@gmail.com. Click
"Test" to check that your settings are correct
and that the camera is able to connect to
the email account you entered for sending
the alerts.
Recipient, etc.: Use this space to enter the
9
address(es) which will receive the alerts. In our
example: addressee@gmail.com
IMPORTANT: When you have finished configuration,
do not forget to click "Save" to save everything you
have entered.
1 2 3 4 5 6
7 8 9
13
EN EN