Selecting The Place Of Installation - IARP MINIGELE Gebrauchs- Und Bedienungs Anleitungen

7.2 SELECTING THE PLACE OF INSTALLATION

In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper
and troublefree working of the cabinet:
• Do not install the cabinet outdoors.
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through
windows).
• Do not install the cabinet where it is exposed to drafts from ventilators
open doors.
• Pay attention to air outlet from air conditioners/ ventilators.
• Keep the air intake and outlet area around the plinth area of the cabinet
clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air
around it; also the area around the condensing unit should not be obstructed
by boxes or other objects; keep a distance from the wall of 10 cm. at least.
7.3 POSIZIONAMENTO
The equipment is fitted with 2 swivel wheels and 2 one-directional wheels for
movement and positioning.
It is strictly necessary after positioning to stabilise the equipment on the ground.
7.4 LOADING
Before placing food inside the freezer, please adjust the thermostat with the lowest point
and leave it to work until the internal temperature will be -18°C; Then fill with food. After
12 hours, adjust the thermostat with a normal point.
It is fundamental not to exceed the load limits indicated to avoid altering correct air
circulation and thereby avoid a higher product temperature.
Never place hot food inside the freezer; wait for the food to cool naturally outside.
Never fully fill the freezer. There must be reasonable space between the products for
better freezing.
The preserved food must be in plastic bags, to avoid releasing odours and humidity and
thereby reducing frost to a minimum.
Air-Condition
-22-