Installation - IARP EFFE 42.2 SMART SCREEN Gebrauchs- Und Bedienungs Anleitungen

HANDLING
The unit is shipped anchored onto a wooden base
and protected by corner posts, cardboard top and
nylon wrapping.
It must only be handled using a fork lift truck with
adequate power to the load.
Positioning the appliance horizontally or on its side
or upside down is to be strictly avoided.
The equipment MUST be kept vertical.

INSTALLATION

Au moment des changements du meuble en utilisant des roulettes, soulever les pieds.
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
The refrigerator must be moved only using a service-lift; during all operations the refrigerator must be
peremptory positioned on the suitable pallet supplied.
Place the counter in horizontal position on a clean
surface, away from:
• Doors or windows
• Sources of heat (radiators, overns, etc) icluded
sun rays.
• Draughts (fans, air conditioning ducts, etc).
The cabinet must be place 4/5 meters from doors,
windows, source of heat and draughts.
In fact anything that causes the temperature to the
inside of the cabinet to rise with detrimental results
to the operation of the unit and energy consumption.
Do not install the unit in open places and do not
expose it to rain.
It is necessary taht the condensing unit obtains a good circulation of air around it.
Also the area around the condensing unit should not be obstructed by boxes or other objects; keep a
distance from the wall of 10 cm. at least.
4/5 m
10 cm
4/5 m
-17-