Installation - IARP MINIGELE Gebrauchs- Und Bedienungs Anleitungen

6. DISPOSAL OF USED MATERIALS
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health
deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings
in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out whe-
eled dustbin.
The symbol on the product or on the packaging indicates the product must not be considered normal domestic
waste, but must be brought to an appropriate collection point for recycling of the electrical and electronic
equipment.
By disposing of this product appropriately, you contribute to avoiding potential negative consequences, which
could derive from inadequate disposal of the product.
For more detailed information on recycling of this product, contact the municipality office, the local waste
disposal service or the shop where you purchased the product.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components and glass.
WARNING!
Polyurethane insulation uses CICLOPENTHANE as expander, that doesn't affect the environment but
is inflammable.
To guarantee the same respect when it's disposed of , never abandon the equipment outside. Don't
throw the packaging material from your equipment in the rubbish but sort the various materials:
eg.polystyrene, cardboard, plastic bags. The demolition of the cabinet and the recovery of the
component materials must be carried out according to the local regulations in force in this matter.

7. INSTALLATION

7.1 STORAGE AND DISMANTLING
Keep all packaging away from children. For each subsequent handling of the cabinet, the use of the wooden platform is
recommended. Carefully remove the packaging, taking care not to damage the components and not to throw away those
that will be needed for assembly.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon
wrapping. It must only be handled using a fork lift truck with adequate power to the load.
Positioning the appliance horizontally or on its side or upside down is to be strictly avoided.
During freezer transport, the angle between the freezer casing and the ground must not exceed 45°.
If the freezer is overturned or tilted during transport, wait approximately 2 hours before switching it on.
-21-