Inhaltsverzeichnis
Werbung
ENGLISH
INSTALLATION
Take out packaging and clean the cabinet using warm water with a 5% concentration of neutral soap.
Be sure to use a soft cloth for drying.
Always keep the cabinet a distance of at least 10 cm. from the
wall. Please settle the adjustable feet(if present) lower or upper
than the level surface of small rollers.
Cabinet must be installed on a perfectly even surface, far away
from any heat source including sun rays. It is very important that
the grills at the base are kept uncovered. Do not install the unit in
open places and do not expose it to rain.
Never use electrical equipment in the refrigerated
compartment
Never place containers of liquid on or immediately above
the ticket counter; should the content spill out, it would
damage the counter.
Install and position the unit in such a way so as to allow easy
access to the power socket.
THE REFRIGERATOR IS NOT SUITABLE FOR
WORKING IN A DANGEROUS ENVIRONMENT WITH
RISK OF FIRE, EXPLOSIONS OR RADIATION.
Operation is regular with ambient temperature indicated on
the technical data plate.
During transports operation put the wood part
under the door in order to avoid possible door-frame
foldings.
INFORMATION ABOUT USE
PUTTING INTO OPERATION
Check that the voltage on the identification plate is the same
as that of the network. THE ELECTRICAL SUPPLY
LINE TO WHICH THE REFRIGERATOR WILL
HAVE TO BE CONNECTED IS TO BE PROTECTED
BY A VERY SENSITIVE DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED
TO THE GENERAL EARTHING PLANT.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords,
adapters or multiple socket outlets to connect the
counter. DIRECTLY connect the equipment to the
mains.
The manufacturer disclaims all responsability for any damage
to people or things due to incorrect observance of this rule.
- 6 -
10 cm
Werbung
Inhaltsverzeichnis
