Installation - IARP RODI Gebrauchs- Und Bedienungs Anleitungen

HANDLING
The unit is shipped anchored onto a wooden base
and protected by corner posts, cardboard top and
nylon wrapping.
It must only be handled using a fork lift truck with
adequate power to the load.
Positioning the appliance horizontally or on its side
or upside down is to be strictly avoided.
The equipment MUST be kept vertical.

INSTALLATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
The refrigerator must be moved only using a service-lift; during all operations the refrigerator must be
peremptory positioned on the suitable pallet supplied.
Place the counter in horizontal position on a
clean surface, away from:
• Doors or windows
• Sources of heat (radiators, overns, etc)
icluded sun rays.
• Draughts (fans, air conditioning ducts,
etc).
The cabinet must be place 4/5 meters from
doors, windows, source of heat and draughts.
In fact anything that causes the temperature to
the inside of the cabinet to rise with detrimental
results to the operation of the unit and energy consumption.
Do not install the unit in open places and do not expose it to rain.
It is necessary taht the condensing unit obtains a good circulation of air around it.
Also the area around the condensing unit should not be obstructed by boxes or other objects; keep a
distance from the wall of 10 cm. at least.
4/5 m
10 cm
4/5 m
-15-