Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HANDLING
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and
nylon wrapping. Movement should be carried out exclusively using a forklift of adequate power for
the weight of the appliance: during this operation, the appliance must be positioned on the specific
pallet provided (pallet should be kept for subsequent movements).
ATTENTION! After unpacking, check that the appliance has not suffered damage
during transportation.
USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-
PACKAGED PRODUCTS.
THIS APPLIANCE IS ONLY DESIGNED FOR USE AT A MAXIMUM ALTITUDE
OF 2000 METRES ABOVE SEA LEVEL.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF
PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment itself
due to display of products other than the afore-specified.
SELECTING THE PLACE OF INSTALLATION
In selecting the place of installation, ensure that the following instructions are observed, this being vital for
proper and troublefree working of the cabinet:
•
Do not install the cabinet outdoors.
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
•
Do not install the cabinet where it is exposed to drafts from ventilators open doors.
•
Pay attention to air outlet from air conditioners/ ventilators.
•
Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
•
It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around
the condensing unit should not be obstructed by boxes or other objects; keep a distance from the wall
of 10 cm. at least.
Air-Condition
-19-
Werbung
Inhaltsverzeichnis
