Date/Time; Setting The Clock - Silvercrest SRH 5 A1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
► All the settings under Alarm times are only saved if you confirm your settings
under the menu option Save by pressing the VOLUME |
SCAN dial
► As soon as Alarm1 and/or Alarm2 are active, an alarm icon
on the left and/or right of display
Shutting off the alarm
Press INFO / MENU
♦
Alarms is shown as the first menu option on the display
Press the VOLUME |
♦
Press the TUNE+
♦
Press the VOLUME |
♦
The display
Press the VOLUME |
♦
Press the TUNE+
♦
Press the VOLUME |
♦
The alarm is now deactivated.

Date/time

If an RDS signal (radio data system) is available, the date and time are automat-
ically set via the radio stations. If no RDS signal is available, you can also set the
date and time manually:

Setting the clock

In the Settings menu, press the TUNE+
♦
until Time setup appears on the display
Press the VOLUME |
♦
Press the TUNE+
♦
display
Press the VOLUME |
♦
Set clock appears on the display 1 and the hour display flashes.
Press the TUNE+
♦
Press the VOLUME |
♦
The minutes flash on the display
Press the TUNE+
♦
Press the VOLUME |
♦
■ 18 │ GB │ IE │ NI
6
.
4
for about 2 seconds to call up the settings menu.
ENTER / SCAN dial
8
or TUNE− button
ENTER / SCAN dial
1
now shows the message Alarm detail.
ENTER / SCAN dial
8
or TUNE− button
ENTER / SCAN dial
ENTER / SCAN dial
8
or TUNE− button
1
.
ENTER / SCAN dial
8
or TUNE− button
ENTER / SCAN dial
8
or TUNE− button
ENTER / SCAN dial
1
for each active alarm.
6
to confirm the selection.
7
select either Alarm1 or Alarm2.
6
to confirm the selection.
6
to set the alarm to Off.
7
to call up the menu option Save.
6
to confirm the entry.
8
or TUNE− button
1
.
6
to confirm the selection.
7
until Set clock appears on the
6
to confirm the selection.
7
to set the hours.
6
to confirm the entry.
1
.
7
to set the minutes.
6
to confirm the entry.
ENTER /
is shown
1
.
7
repeatedly
SRH 5 A1