Language
In the system menu, you can select between the languages English, French,
German, Czech, Danish, Dutch, Polish and Slovak:
♦
While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until Language appears on the display
♦
Press the VOLUME |
♦
Press the TUNE+
VOLUME |
displayed .
♦
Press the VOLUME |
Factory settings
NOTE
►
If you reset the device to the factory defaults using the Factory reset func-
tion, all stored settings such as stored radio stations, date, time and alarm
times will be deleted .
♦
While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until Factory reset appears on the display
♦
Press the VOLUME |
♦
Press the TUNE+
factory settings) or No (the device is not reset to the factory settings) .
♦
Press the VOLUME |
its factory settings . The message Restarting... appears on the display
The device restarts and then automatically switches to standby mode .
Software version
♦
While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until SW version appears on the display
♦
Press the VOLUME |
version of the device .
SRH 5 B2
ENTER / SCAN dial
or TUNE−
8
ENTER / SCAN dial
ENTER / SCAN dial
ENTER / SCAN dial
or the TUNE−
8
ENTER / SCAN dial
ENTER / SCAN dial
ENTER / SCAN dial
or TUNE−
8
ENTER / SCAN dial
.
1
6
button several times or turn the
7
until the desired language is
6
6
or TUNE−
8
ENTER / SCAN dial
.
1
6
button or turn the VOLUME |
7
to select Yes (the device is reset to the
6
6
or TUNE−
8
ENTER / SCAN dial
.
1
6
button (several
7
6
to confirm the selection .
to confirm the selection .
button (several
7
6
to confirm the selection .
to reset the device to
.
1
button (several
7
6
to display the software
GB │ IE
65
│
■