Station Information; Fm Radio Operation - Silvercrest SRH 5 B2 Bedienungsanleitung Und Sicherheitshinweise

Station information

In DAB+ radio mode, you can show additional station information on the
display
1
♦ Briefly press the INFO / MENU button
following station information:
–
Scrolling text (radio text)
–
Title
–
Artist
–
Signal strength (bar)
–
Programme type
–
Group name
–
Multiplex number/frequency
–
Signal error
–
Audio bitrate (kbps)
–
Time
–
Date
NOTE
► The amount of station information available may vary depending on the
selected station .

FM radio operation

Automatic station scan with station storage (AMS)
The automatic station scan with station memory scans the entire frequency band
once and automatically saves the found FM radio stations as a station list .
♦ This device must be switched on . If necessary, briefly press the
to switch on the device .
♦ Briefly press the SOURCE /
FM radio mode FM is shown on the display
♦ Press the VOLUME |
to start the automatic station scan . The progress of the scan is shown as a
progress bar and the number of stations found is shown on the display
The FM radio stations found are automatically stored in the station list on
order of increasing frequency . When the scan is finished, the first station in
the station list is automatically played .
NOTE
► An automatic station scan with station saving may overwrite an existing
station list .
■ 50 GB │ IE
│
:
repeatedly to display the
4
button (several times if necessary) until
3
.
1
ENTER / SCAN dial
button
for approx . 2 seconds
6
SRH 5 B2
2
.
1