Use Of Dishwasher Salt - Electrolux GA60GLI220 Benutzerinformation

Electronic adjustment
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function button (B) and
function button (C) at the same time un-
til the indicators of function buttons (A),
(B) and (C) flash.

USE OF DISHWASHER SALT

How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
3. Release function button (B) and function
button (C).
4. Press function button (A).
• The indicators of function button (B)
and function button (C) go off.
• The indicator of function button (A)
continues to flash.
• The display shows the setting of the
water softener (example:
5).
5. Press function button (A) again and
again to change the setting.
6. Deactivate the appliance to confirm.
If the water softener is set electronically
to the level 1, the salt indicator stays
off.
electrolux 63
= level