WEISS ROBOTICS GRIPKIT E PRO-S Betriebsanleitung Seite 55

13 Translation of the original declaration of incorporation
In terms of the EC Machinery Directive 2006/42/EG, Annex II, Part B
Manufacturer:
Distributor:
We hereby declare that the following products
meet the applicable basic requirements of the Machinery Directive (2006/42/EC). The
incomplete machine may not be put into operation until conformity of the machine
into which the incomplete machine is to be installed with the provisions of the Machi-
nery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100-1
EN ISO 12100-2
The manufacturer agrees to forward the special technical documents for the incom-
plete machine to state offices on demand. The special technical documents according
to Annex VII, Part B, belonging to the incomplete machine have been created.
Person responsible for documentation: Dr.-Ing. K. Weiß, Tel.: +49(0)7141/94702-0
Place, Date, Signature:
Details of the signatory:
Weiss Robotics GmbH & Co. KG
Karl-Heinrich-Kaeferle-Str. 8
71640 Ludwigsburg, Germany
Weiss Robotics GmbH & Co. KG
Karl-Heinrich-Kaeferle-Str. 8
71640 Ludwigsburg, Germany
GRIPKIT P PRO, GRIPKIT E PRO, GRIPKIT CR PRO
Safety of machines – Basic concepts, general principles for
design – Part 1: Basic terminology, methodology
Safety of machines – Basic concepts, general principles for
design – Part 2: Technical principles
Ludwigsburg, 6. March 2020
Weiss Robotics GmbH & Co. KG, General Manager
25 25