Additional Safety Instructions - Parkside PSTDA 20-Li B3 Originalbetriebsanleitung

use of other batteries may result
in injuries and risk of fire.
c) Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts. A
short circuit between the battery
contacts may cause burns or
fire.
d) If used incorrectly, liquid
may leak from the bat-
tery. Avoid contact with
this. In the event of ac-
cidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical assis-
tance. Leaking battery fluid may
cause skin irritations or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be un-
predictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explo-
sion.
g) Follow all instructions
for charging and never
charge the battery or the
battery-powered tool
outside the temperature
range stated in the oper-
ating instructions. Incorrect
charging or charging outside
the permitted temperature range
may destroy the battery and in-
crease the risk of fire.
6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
Additional safety
instructions
• Hold the electric tool by
the insulated gripping sur-
faces when performing
work in which the cutting
tool may come into con-
tact with hidden wiring.
Contact with a live wire can
also cause a charge in metal
parts of the device and result in
an electric shock.
• Fasten and secure the
workpiece by means of
clamps or with another
GB IE
31