After Use; Cleaning And Care - Silvercrest SDM 1500 D2 Bedienungsanleitung

After use

1) Allow the appliance to cool down.
2) Remove the pad 6/o.
3) Remove the water tank 8 from the appliance and empty it.
4) Pull the upper cable hook z out a little and turn it back upwards.
Wind the cable back around the two cable hooks z/i.
Fix the end of the power cable using the cable clip located on the cable.

Cleaning and care

RISK OF ELECTRIC SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING! RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION! PROPERTY DAMAGE
► When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects.
Empty the water tank 8 after every use.
■
After each use, remove the pad 6/o from the steam foot 5 and wash it out.
■
Note the following washing instructions when you wash the pad 6/o in
■
the washing machine:
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
│ GB │ IE
■ 30
Wash at max. 60°C
Do not bleach
Do not tumble dry
Do not iron
SDM 1500 D2