Safety Instructions - Mettler Toledo O2 ISM Bedienungsanleitung

O ISM Qualification Kit
2
Other prerequisites for appropriate use include:
– Compliance with the instructions, notes and requirements set out
in this instruction manual.
– Acceptance of responsibility for regular inspection, maintenance
and functional testing of all associated components, also includ-
ing compliance with local operational and plant safety
regulations.
– Compliance with all information and warnings given in the
documentation relating to the products used in conjunction with
the sensor (housings, transmitters, etc.).
– Observance of all safety regulations governing the equipment in
which the sensor is installed.
– Correct equipment operation in conformance with the prescribed
environmental and operational conditions, and admissible
installation positions.
– Consultation with METTLER TOLEDO Process Analytics in the
event of any uncertainties.
2.3

Safety instructions

– The plant operator must be fully aware of the potential risks and
hazards attached to operation of the particular process or plant.
The operator is responsible for correct training of the workforce,
for signs and markings indicating sources of possible danger,
and for the selection of appropriate, state-of-the-art instrumenta-
tion.
– It is essential that personnel involved in the commissioning,
operation or maintenance of these simulators or of any of the
associated equipment (e.g. housings, transmitters, etc.) be prop-
erly trained in the process itself, as well as in the use and handling
of the associated equipment. This includes having read and
understood this instruction manual.
© 12/18 Mettler-Toledo GmbH, Greifensee
Printed in Switzerland
O ISM Qualification Kit
2
52 300 440 E
7