Product Description - Mettler Toledo O2 ISM Bedienungsanleitung

16
3

Product Description

The O
2
heads and allows the simulation of the following sensor types with
predefined values and errors (not changeable by the user) to assure
safe use as qualification tool:
– InPro 6850 i
Each sensor plug-in head corresponds to one of the mentioned
METTLER TOLEDO sensors and delivers the complete data of an ISM
sensor.
The O
2
– Tool for the qualification of measuring systems.
– Service tool for quick checks and loop trouble-shooting.
The data indicated (primary/secondary) and transmitted are as fol-
low:
– Main measured value
– Temperature
– Error message according to indication.
All standard process and wear data of the sensor are also available
in each plug-in head and are also sent to the transmitter or the PLC
as well as to the iSense software.
O ISM Qualification Kit
2
52 300 440 E
ISM Qualification Kit is a set of 5 different sensor plug-in
– InPro 6900 i
ISM Qualification Kit has basically 2 functions:
© 12/18 Mettler-Toledo GmbH, Greifensee
O ISM Qualification Kit
2
– InPro 6950 i
Printed in Switzerland