Installation - Agilent Technologies Turbo-V 70 PCB Bedienungshandbuch

16 Instructions for Use

Installation

Installation

WARNING! Voltages between controller and power transformer and transformer and
mains are dangerous in case of contact. Protect adequately the controller and
the transformer installed into the customer system from accidental contacts.
WARNING! High voltage developed in the controller can cause severe injury or death.
Before servicing the unit, disconnect the input power cable. High temperature
developed in the controller can cause severe injury. Protect adequately the
controller from accidental contacts.
The controller installed into the customer system must be positioned so that
NOTE
cold air can flow through the PCB components. Do not install or use the
controller in an environment exposed to atmospheric agents (rain, snow, ice),
dust, aggressive gases, or in explosive environments or those with a high fire
risk.
During operation, the following environmental conditions must be
respected:
228/280
temperature: from O °C to +40 °C
relative humidity: 0 – 95 % (without condensation).
Turbo-V 70 PCB Controller User Manual / 87-900-871-01 (E)