Troubleshooting; Malfunction Causes And Remedies; Possible Cause; Storage/Disposal - Silvercrest TLGL 1000 B1 Bedienungsanleitung

Troubleshooting

In this section you will receive important information for the localisation and
remedying of malfunctions .

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:
Defect
The battery
charger is not
functioning .
The inserted
batteries are not
being charged .
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services .

Storage/Disposal

Storage

If you do not intend to use the device for a longer time, remove the batteries and
store it in a clean, dry place away from direct sunlight .
■ 38 │ GB │ MT

Possible cause

The power cable is not
plugged in .
Mains power socket is not
supplying power .
The batteries are not inserted
as per their polarity .
The inserted batteries are
not suitable for charging .
The temperature monitoring
was initiated .
Solution
Insert the power cable into a mains
power socket .
Check the circuit fuse .
Insert the batteries as per their polarity
(see marking in the charging slot) .
Match the charging contacts to the
positions of the positive and negative
terminals on your Li-ion battery .
Observe the labelling on the Li-ion
battery .
Insert only rechargeable Ni-Cd and
Ni-MH batteries of the types AAA/
AA/C/D and 3 .6 - 3 .7V Li-ion
batteries .
Disconnect the plug from the mains
power socket and allow the device to
cool down .
TLGL 1000 B1