Inhaltsverzeichnis
Werbung
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Temperature differs
greatly from the set
value.
Interior light does not
function.
The frozen food is frozen
solid.
Possible cause
The bulb is defective.
Light switch is sticking.
Fig. t/A
Remedial action
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few
hours and check whether the temperature
has approached the set value.
If the temperature is too low check the
temperature again the next day.
Change the bulb Fig t/B
1. Pull out the mains plug or disconnect
the fuse.
2. Slide cover grille forwards and remove.
3. Change the bulb.
(Replacement bulb, 220-240 V a.c.,
E14 bulb holder, see defective bulb for
wattage)
Check whether it can be moved.
Loosen frozen food with a blunt object.
Do not use a knife or pointed object. You
could damage the refrigerant tubing or the
plastic surface.
en
33
Werbung
Inhaltsverzeichnis
