Rs 232/Rs 485 Communication Description 2312 - Agilent Technologies Turbo-V 701 Bedienungshandbuch

17 Technical Information
RS 232/RS 485 Communication Description
Figure 21
RS 232/RS 485 Communication Description
Both the RS 232 and the RS 485 interfaces are available on the
connector J2.The communication protocol is the same (see the
structure below), but only the RS 485 manages the address field.
Therefore to enable the RS 485 is necessary to select the type of
communication as well as the device address by means of the T-Plus
software.
232/288 Turbo-V 701 Rack Controller User Manual / 87-901-032-01