Agilent Technologies Turbo-V 701 Bedienungshandbuch Seite 253

Measures
Pressing once on the MEASURES pushbutton, the information is
displayed:
S
On pressing the key again, the display goes back to main screen
HS
LS
If not otherwise specified the following status are showed with a
solid symbol (no blinking request). Not showed in programming.
Turbo-V 701 Rack Controller User Manual / 87-901-032-01
P=XXX W is the power absorbed by to the pump.

T=XX °C is the pump bearing temperature.

XXXX Hz is the rotational frequency of the pump.

I=X.XXA is the current absorbed by the pump.

T A T U S
M E
P = X X X
I = X . X
S T A T U
M
PD Power Derating (blinking warning)

Purge when active shows the status of the PURGE

VALVE OPEN
Vent when active (blinking) the VENT VALVE is OPEN

or a CONTROLLER VENT BRAKING is active
HS Shows the high speed selection: the controller is at

HIGH SPEED.
LS Shows the low speed selection: the controller is at

LOW SPEED
Technical Information
How to Use by Front Panel
A S U R E
W T =
X A
S X
O D E
17
X X X H
S
X X ° C
X X H z
PD
Purge
. Vent
253/288
z