Technical Data - Husqvarna 122C Bedienungsanweisung

• Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.
• Attach the transport guard during transportation and
storage.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Power / Max. engine output, acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel system
Fuel tank capacity, l/cm³
Weight
Weight without fuel, cutting attachment and guard, kg
1
Noise emissions
Sound power level, measured, dB(A)
Sound power level, guaranteed (L
2
Noise levels
Equivalent sound pressure level at the operator's ear, measured ac-
cording to EN ISO 11806 and ISO 22868, dB(A):
3
Vibration levels
1
Noise emissions in the environment measured as sound power (L
EC. Reported sound power level for the product has been measured with the original cutting attachment that
gives the highest level. The difference between guaranteed and measured sound power is that the guaran-
teed sound power also includes dispersion in the measurement result and the variations between different
products of the same model according to Directive 2000/14/EC.
2
Reported data for equivalent sound pressure level for the product has a typical statistical dispersion (standard
deviation) of 1 dB (A).
3
Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
941 - 004 - 10.04.2019
Technical data
3
) , dB(A)
WA
• Remove the spark plug cap from the spark plug.
• Attach the product during transportation. Make sure
that it cannot move.
• Clean and do servicing on the product before long-
term storage.
122C
21.7
2900
7200
7200
0.6/0.8 @ 7800
Yes
No
HQT-4 672201
0.5
0.3/300
4.4
102
104
88
) in conformity with EC directive 2000/14/
WA
122LK
21.7
2900
9100
6232
0.6/0.8 @ 7800
Yes
No
HQT-4 672201
0.5
0.3/300
4.8
104
108
90
2
.
17