Maintenance; Maintenance Schedule - Husqvarna 122C Bedienungsanweisung

WARNING: Clean the trimmer head cover
each time you assemble new trimmer line to
prevent unbalance and vibrations in the
handles. Also do a check of the other parts
of the trimmer head and clean it if
necessary.
Grass trimmer head
• Make sure that you wind the grass trimmer line
tightly and equally around the drum to decrease the
vibration.
• Use only the approved grass trimmer heads and
grass trimmer lines. Refer to
18 .
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.

Maintenance schedule

Maintenance

Clean the external surface.
Clean the air filter. Replace if it is necessary.
Examine the function of the throttle trigger lock and the throttle.
Examine the stop switch.
Examine the guards.
Examine the trimmer head.
Examine the locknut.
Examine for fuel leaks.
Make sure that the grass blade is aligned with the center, that it is sharp and
does not have damages on the blade or the center hole.
Make sure that the cutting attachment does not rotate at idle speed.
Apply grease to the two-piece shaft.
Examine the starter rope handle and the starter rope.
Examine the bevel gear grease.
Clean the external surface of the spark plug. Remove the spark plug and meas-
ure the electrode gap. Adjust the electrode gap or replace the spark plug.
Clean the cooling system.
Clean or replace the spark arrestor screen on the muffler.
Clean the external surface of the carburetor and the area around it.
941 - 004 - 10.04.2019
Accessories on page
Maintenance
• Use a correct length of the grass trimmer line. A long
grass trimmer line uses more engine power than a
short grass trimmer line.
• Make sure that the cutter on the cutting attachment
guard is not damaged.
• Soak the grass trimmer line in water for 2 days
before you attach the grass trimmer line to the
product. This increases the life of the grass trimmer
line.
• Refer to the instructions for the cutting attachment to
use the correct procedure to load the cord and the
correct cord diameter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
13