Battery Charger Safety; Safety Instructions For Maintenance - Husqvarna 120iTK4-H Bedienungsanweisung

To start the SavE function on page 13 for
2. Refer to
the function of the SavE button (B).
Troubleshooting on page 15 if the warning
3. Refer to
indicator (C) is on or flashes.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you release the handle, the power trigger and the
power trigger lockout move back to their initial position.
(Fig. 25)
1. Make sure that the power trigger is locked when the
lockout is in its initial position. (Fig. 26)
2. Pull and release the lockout and make sure that it
moves back to its initial position . (Fig. 27)
3. Make sure that the power trigger and the lockout
move freely and that the return spring operates
correctly. (Fig. 28)
To start the product on page
4. Start the product, see
12 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
Battery safety
WARNING:
instructions that follow before you use the
product.
• Only use the BLi series and 40-B series battery. For
Technical data on page 16 . The
details, refer to
battery is software encrypted.
• Use the BLi series and 40-B series battery that
is rechargable as a power supply for the related
Husqvarna products only. To prevent injury, do not
use the battery as a power supply for other devices.
• Risk of electrical shock. Do not connect the battery
terminals to keys, coins, screws or other metal. This
can cause a short circuit of the battery.
• Do not use non-rechargeable batteries.
• Do not put objects into the air slots of the battery.
• Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
• Keep the battery away from rain and wet conditions.
• Keep the battery away from microwaves and high
pressure.
• Do not try to disassemble or break the battery.
• If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and soap, and
get medical aid. If you get liquid in your eyes, do not
rub but flush with water for a minimum of 15 minutes
and get medical aid.
• Use the battery in temperatures between -10 °C (14
°F) and 40 °C (114 °F).
10
Read the warning
• Do not clean the battery or the battery charger with
water. Refer to To clean the product, the battery and
the battery charger on page 14 .
• Do not use a defective or damaged battery.
• Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
• Keep the battery away from children.

Battery charger safety

WARNING:
instructions that follow before you use the
product.
• Risk of electrical shock or short circuit if the safety
instructions are not obeyed.
• Do not use other battery chargers than the
one supplied for your product. The recommended
charger is QC80 / 40-C80 when you charge the BLi
series and 40-B series battery.
• Do not try to disassemble the battery charger.
• Do not use a defective or damaged battery charger.
• Do not lift the battery charger by the power cord. To
disconnect the battery charger from a mains socket,
pull out the plug. Do not pull the power cord.
• Keep all cables and extension leads away from
water, oil and sharp edges. Make sure that the cable
is not caught between objects, for example, doors,
fences or equivalent.
• Do not use the battery charger near flammable
materials or materials that can cause corrosion.
Make sure that the battery charger is not covered.
Pull out the plug to the battery charger if there is
smoke or fire.
• Only charge the battery indoors in a location with
good airflow and away from sunlight. Do not charge
the battery outdoors. Do not charge the battery in
wet conditions.
• Only use the battery charger where the temperature
is between 5 °C (41 °F) and 40 °C (104 °F). Use the
charger in an environment which has a good airflow,
dry and free from dust.
• Do not put objects into the cooling slots of the
battery charger.
• Do not connect the battery charger terminals to
metal objects as this can short circuit the battery
charger.
• Use approved mains sockets that are not damaged.
Make sure that the cord of the battery charger is not
damaged. If extension cables are used, make sure
that the extension cables are not damaged.

Safety instructions for maintenance

WARNING:
instructions that follow before you do
maintenance on the product.
Read the warning
Read the warning
1553 - 008 - 31.10.2022