DEUTSCH
9.4.
Lack of impulses on the flowmeter (AL3)
When the flowmeter does not receive impulses from the flowmeter, the display shows the following
alarm:
9.5.
Alarm for water filter system
When the water filter system needs maintenance, the display shows the following alarm:
This alarm appears when the maximum amount of liters (set in the technical programming) has
been reached and the filter needs to be renewed.
After having renewed the water filter system, press
then switch off the machine and switch it on again using the main switch. This will turn off the
alarm and reset the counter.
9.6.
Maintenance Alarm
When the maximum amount of coffee produced has been reached, the display shows the following
alarm:
This alarm appears when the maximum number of coffee, preset in the technical programming,
has been reached and the machine needs maintenance.
After having finished the maintenance, press
switch off the machine and switch it on again using the main switch. This will turn off the alarm
and reset the counter.
52
Espresso Coffee MachineCompass MB by fiamma
. Introduce the password, press RESET and
i Introduce the password, press RESET and then
ENGLISH