Alarms And Troubleshooting; Time-Out (Automatical Stop) During Boiler Filling; Temperature Probe In Short-Circuit/ Overheating (Al1) - Fiamma Compass Multiboiler Gebrauchsanleitung

DEUTSCH

9. Alarms and Troubleshooting

Whenever the symbol
functions. On display C, press symbol
9.1.

Time-Out (Automatical Stop) during boiler filling

When display shows...
 This alarm indicates that the preset time for the boiler filling up has been exceeded. In this case,
all main functions of the machine are automatically blocked.
 All keys on the keyboards start to blink.
 In order to exit the alarm mode, you need to switch off the machine and switch it on again.
... if shows ...
... it means the Min. Level of Steam boiler is disconnected.
9.2.

Temperature probe in short-circuit/ overheating (AL1)

In case a temperature probe suffers a short-circuit or overheating, all keys start to blink. The electronic
unit blocks all keyboards and main functions of the machine. The display shows:
In case a probe in a coffee water boiler malfunctions, the display shows the following message,
indicating the probe in question:
50
Espresso Coffee MachineCompass MB by fiamma
appears on the display, you need to check the machine's settings and
in order to access the troubleshooting menu.
Display C
ENGLISH