Specifications - PowerWalker VFI 1000 Bedienungsanleitung

6. Specifications
MODEL
CAPACITY*
INPUT
Low Line Transfer
Voltage
Low Line Comeback
Range
High Line Transfer
High Line Comeback
Frequency Range
Phase
Power Factor
OUTPUT
Output voltage
AC Voltage Regulation
Frequency Range
(Synchronized Range)
Frequency Range (Batt. Mode)
Overload
Current Crest Ratio
Harmonic Distortion
Transfer AC Mode to Batt. Mode
Time Inverter to Bypass
Waveform (Batt. Mode)
EFFICIENCY
AC Mode
Battery Mode
BATTERY
Battery Type
Numbers
Standard
Recharge Time
Model
Charging Current
Charging Voltage
Battery Type & Numbers
Long‐run
Charging Current
Model
Charging Voltage
PHYSICAL
Tower Dimension, D X W X H
Case
Net Weight (kgs)
Dimension, D X W X H
Rack Case
Net Weight (kgs)
ENVIRONMENT
Operation Humidity
Noise Level
MANAGEMENT
Smart RS‐232 or USB
Optional SNMP
* Derate capacity to 60% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 208VAC.
www.powerwalker.com
1000
1000 VA / 800 W 1500 VA / 1200 W
160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % or 80 VAC / 70 VAC / 60 VAC / 50 VAC ± 5 %
( based on load percentage 100% ‐ 80 % / 80 % ‐ 70 % / 70 ‐ 60 % / 60 % ‐ 0)
≧ 0.99 @ 220‐230 VAC or 110‐120 VAC
208/220/230/240VAC or 110/115/120/127 VAC
110%‐130%: UPS shuts down in 30 seconds at battery mode or transfers to bypass mode
>130%: UPS shuts down immediately at battery mode or transfer to bypass mode when
≦ 3 % THD (Linear Load)
≦ 6 % THD (Non‐linear Load)
~ 85%
12 V / 7 AH 12 V / 9 AH
3
4 hours recover to 90% capacity (Typical)
41.0 VDC ± 1%
Depending on the capacity of external batteries
41.0 VDC ± 1%
397 X 145 X 220 (mm)
13 7 14
420x438x88[2U] (mm)
16 10 17
20‐90 % RH @ 0‐ 40°C (non‐condensing)
Supports Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Power management from SNMP manager and web browser
Page 18
1500 2000
2000 VA / 1600 W
175 VAC ± 5 % or 85 VAC ± 5 %
300 VAC ± 5 % or 150 VAC ± 5 %
290 VAC ± 5 % or 145 VAC ± 5 %
40Hz ~ 70 Hz
Single phase with ground
± 3% (Batt. Mode)
47 ~ 53 Hz or 57 ~ 63 Hz
50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz
100%~110%: audible warning
when the utility is normal.
the utility is normal.
3:1
≦ 4 % THD (Linear Load)
≦ 7 % THD (Non‐linear Load)
Zero
4 ms (Typical)
Pure Sinewave
~ 83%
12 V / 7 AH
3 6
1.0 A(max.)
4.0 A or 8.0 A(max.)
421 X 190 X 318 (mm)
7 26
580x438x133[3U] (mm)
10 29
Less than 45dBA @ 1 Meter
3000
3000 VA / 2400 W
~ 88%
12 V / 9 AH
6
82.1 VDC ±1%
82.1 VDC ±1%
13 28 13
17 31 17