Specifications And Technical Data - Comet MTP MC 8 Anweisungen Für Den Zusammenbau, Die Bedienung Und Wartung

The manual must be deemed an integral part of the motor pump and must be looked after for future reference
and kept in a protected place where it can easily be referred to in case of need.
The manual contains safety precautions for the operator and those surrounding him/her and for the protection
of the environment.
In case of deterioration or loss, a new copy must be requested from the Manufacturer or from a Skilled
Technician.
In the event of the machine in which the motor pump is integrated being transferred to another user, please
also include this manual and any manual for the combustion engine equipping the motor pump.
The Manufacturer reserves the right to make all the amendments required to update and correct this publication
without prior notice.
The symbol:
marking certain parts of the text indicates a likely chance of injury to persons unless the relative prescriptions
and indications are followed.
The symbol:
marking certain parts of the text indicates the possibility of damaging the motor pump unless the relative
instructions are followed.
The motor pumps consist of a diaphragm pump or piston pump (MTP YA 65 only) complete with relative
control unit (also see
the MNF code; three phase if the plate shows the TRF code) or combustion engine (2-stroke if the plate shows
the 2T code; 4-stroke if the plate shows the 4T code).
POWER SUPPLY/FUEL
PUMP OIL
• MTP MC 8 - MTP MC 18
• MTP YA 65
• Other motor pumps
REDUCTION GEAR LUBRICANT
• MTP MC 8 - MTP MC 18
• MTP MC 20/20 - MTP MC 25
• Other motor pumps
HYDRAULIC CONNECTION
Max water supply temperature
• MTP YA 65
• Other motor pumps
Min water supply temperature
Max water supply pressure
• MTP YA 65
• Other motor pumps
Max priming depth
• MTP MC 8 - MTP MC 18 - MTP MC 20/20 - MTP MC 25
• MTP YA 65
• Other motor pumps
24
WARNING
CAUTION

SPECIFICATIONS AND TECHNICAL DATA

"s " paragraph), coupled to an electric motor (single phase if the plate shows
afety devIces
SYMBOLS
Motor pump
with electric motor
Power voltage, frequency
and power are shown on
the plate (12).
AGIP ROTRA MULTI THT
AGIP MOTOR OIL HD 20W/40
-
AGIP MOTOR OIL HD 20W/40
AGIP ROTRA MULTI THT
0,8 MPa - 8 bar - 116 psi
0,01 MPa - 0,1 bar - 1,45 psi
1,5 m - 4,9 ft (3,5 m - 11,5 ft for periods of no longer than 10-15 min)
1,0 m - 3,3 ft (3,0 m - 9,8 ft for periods of no longer than 10-15 min)
Motor pump
with combustion engine
The fuel to be used is shown in
the engine manual.
(*)
AGIP Blasia S 150
(**)
(***)
Grease AGIP GREASE CT 0
(***)
(**)
60 °C - 140 °F
40 °C - 104 °F
5 °C - 41 °F
1,0 m - 3,3 ft
(continued on next page)