Sony HKDV-900 Bedienungsanleitung Seite 34

Settings Made When the HKPF-9000 Is Connected/Error Indications
Error indications
When the HKPF-9000 is connected to the HKDV-900,
errors that occur in the HKPF-9000 can be monitored
on the HKDV-900.
Flashing buttons have the following meanings:
Flashing INPUT button: The signal input to the
HKPF-9000 may be abnormal. There may be no
input signal or the signal format does not conform
with that specified on the HKDV-900.
Flashing INPUT and OUTPUT buttons: The
combination of input and output signals does not
conform with that specified on the HKDV-900.
Displaying the error information in the
MEMORY ADDR. indicator
When an error has occurred and the INPUT and
OUTPUT buttons flash, you can display the contents
of the INPUT FORMAT indicator on the HKPF-9000
on the MEMORY ADDR. indicator of the HKDV-900
as well.
INPUT button
OUTPUT button
–/+ buttons
To display the error contents, press the flashing
INPUT and OUTPUT buttons.
To switch to the input/output signal format
number display
While the error indication is displayed, press the + or –
button.
To switch to the memory address indication
Press the INPUT, OUTPUT, or CANCEL button.
When DIP switch S100-2 on the internal board is set to
ON, the MEMORY ADDR. indicator reverts back to
showing the adjustment and setting values.
14(GB)
For details on the error indications on the HKPF-9000,
refer to the installation manual supplied with the HKPF-
9000.
CANCEL button