Sony HKDV-900 Bedienungsanleitung Seite 26

Names and Functions of Parts
2 MASTER/MASTER/–/H (horizontal)
CROP•V(vertical) LETTER adjustment knob and
UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light.
When HD is selected: Master gain adjustment
(simultaneously adjust the Y/P
When D1 is selected: Master gain adjustment
(simultaneously adjust the Y/B–Y/R–Y signals)
When D2 is selected: Not used
When IMAGE ENHANCER is selected: Horizontal
cropping position in the edge crop mode with a
down-converter (Hold down the CROP button
while turning the H CROP knob for the fine
adjustment.), and horizontal position of the HDTV
image in the edge crop mode and vertical cropping
position in the letter box mode with an up-
converter
3 Y/Y/VIDEO/DETAIL GAIN adjustment knob
and UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light.
When HD is selected: Y signal level adjustment
When D1 is selected: Y signal level adjustment
When D2 is selected: Video output signal gain
adjustment
When IMAGE ENHANCER is selected: Detail
gain (sharpness of edge enhancement) adjustment
4 P /B–Y/CHROMA/LIMITER adjustment knob
B
and UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light. (When IMAGE
ENHANCER is selected the "MIN" indication lights.)
When HD is selected: P
adjustment
When D1 is selected: B–Y (color difference signal
adjustment
When D2 is selected: Chroma gain adjustment
When IMAGE ENHANCER is selected: Maximum
level of the detail added to enhance the original
signal
6(GB)
/P signals)
B R
(color difference signal
B
5 P /R–Y/HUE/CRISP adjustment knob and
R
UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light. (When IMAGE
ENHANCER is selected the "MIN" indication lights.)
When HD is selected: P
adjustment
When D1 is selected: R–Y (color difference signal
adjustment
When D2 is selected: Hue gain adjustment
When IMAGE ENHANCER is selected:
Crispening setting (amplitude setting for not
enhancing small-amplitude signals)
6 SETUP/–/SETUP/DEPEND adjustment knob
and UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light. (When IMAGE
ENHANCER is selected the "MIN" indication lights.)
When HD is selected: Setup level adjustment
When D1 is selected: Not used
When D2 is selected: Setup level adjustment
When IMAGE ENHANCER is selected: "Level
dependent" setting (luminance range for edge
enhancement)
7 SYNC PHASE/SYNC PHASE/FREQUENCY
adjustment knob and PRESET button
Carry out the following adjustment, according to the
output selection. Pressing the PRESET button returns
to the center value (the factory default setting), and the
"0" indicator lights.
When HD is selected: Sync phase adjustment
When D1/D2 is selected: Sync phase adjustment
When IMAGE ENHANCER is selected:
Adjustment of center frequency for edge
enhancement
(color difference signal
R