Parkside PFBS 160 B2 Originalbetriebsanleitung Seite 70

Application examples/selecting a suitable tool:
Function
Drilling
Milling
Engraving
Polishing,
rust removal
CAUTION!
Exert only a light pressure
when applying the tool to
the workpiece.
Cleaning
Grinding
Cutting
■ Note that the maximum diameter of the grinding assembly and of grinding cones, pencil grinders and
grinding points with a thread insert may not exceed 55 mm and the maximum diameter for sandpaper
sanding accessories may not exceed 80 mm.
NOTE
► The max. permissible length of a mandrel is 33 mm.
■ Store the accessories in the original box or store the accessory components somewhere else to protect
them from damage.
■ Store the accessories somewhere dry and not in the vicinity of aggressive media.
■ If you exert too much pressure, the fitted tool can break and/or the workpiece could be damaged.
You will achieve optimum working results by moving the tool over the workpiece at a steady speed
and while exerting light pressure.
■ When carrying out cutting work, hold the appliance firmly with both hands.
PFBS 160 B2
Accessories
Drill bit
Milling bits
Engraving bits
Metal brush
Polishing attachments
Synthetic brushes
Grinding discs
Grinding bits
Abrasive belts
Cutting discs
Use
Working wood
Various jobs; e.g.
creating recesses,
hollows, forms, grooves
or slits
Labelling, handicrafts
rust removal
Various metals and plas-
tics, especially precious
metals such as gold and
silver
e.g. cleaning hard-to-
access plastic housings
or the area around a
door lock
Grinding work on
stone, wood, fine work
on hard materials such
as ceramics or alloyed
steel
Working metal, plastic
and wood
Protrusion (min–max)
mm
18–25, using the
smallest drill, the
protrusion is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
10
12–18
GB │ MT │
67 ■