Weight Only; Switching Off The Diagnostic Scales; Configuring Users; Transferring Assigned Measurements - Silvercrest SBF 76 Bedienungs- Und Sicherheitshinweise

The following information will be displayed:
- Weight in kg with BMI (Fig. D)
- Body fat in % (BF) (Fig. E)
- Body water in % (Fig. F)
- Muscle mass in % (Fig. G)
- Bone mass in kg (Fig. H)
- Basal metabolic rate in kcal (BMR) (Fig. I)
- Active metabolic rate in kcal (AMR) (Fig. J)
Note: For two or more possibly recognised users,
the user changes in the display. Select your user by
pressing the SET button
If a user is not recognised, only the weight will be
displayed along with "- - -". You can then select
your user using the buttons
confirm using the SET button
so, this measurement will not be saved.

Weight only

Stand on the diagnostic scales wearing shoes.
Stand still on the diagnostic scales with the
weight distributed evenly between both legs.
The diagnostic scales will start to measure immedi-
ately. If a user has been assigned (the user initials
will be displayed), the weight and BMI will be
17
displayed and saved.
Note: For two or more possibly recognised users,
the user changes in the display. Select your user by
pressing the SET button
If a user is not recognised, only the weight will be
displayed along with "- - -". You can then select
your user using the buttons
confirm using the SET button
so, this measurement will not be saved.
Switching off the
diagnostic scales
The diagnostic scales feature an auto shut-off and
will automatically switch off after displaying the
results.
.
3
and and
2 4
. If you do not do
3
.
3
and and
2 4
. If you do not do
3

Configuring users

The weighing scales are able to save measurements
from up to 8 different users. Upon starting a new
measurement, the diagnostic scales will automati-
cally assign the measurement to the created user if
the last saved measurement was within +/- 3kg of
the current value.
For two or more possibly recognised users, the user
changes in the display. Select your user by pressing
the SET button .
3
Transferring assigned
measurements
If the "HealthForYou" app is open and actively
connected via Bluetooth
(indicated by the Bluetooth
display ), newly assigned measurements will be
1
immediately transferred to the app. In this case the
values will not be saved to the diagnostic scales.
If the app is not open, newly assigned values will
be saved to the diagnostic scales. The diagnostic
scales can save up to 30 values per user. The saved
values are automatically transferred to the app af-
ter opening the app within Bluetooth
can automatically be transferred with the diagnos-
tics scales off, provided you are within Bluetooth
range.

Deleting scales data

To completely delete all values and outdated
user data from the diagnostic scales, switch on
the diagnostic scales and hold the Mode button
for approx. 6 seconds.
5
The LC display will read "CLR" for a few
1
seconds.
To delete just one user, switch the diagnostic
scales on and press the buttons
to select the user. Then press the Mode
4
button for approx. 6 seconds. The LC dis-
5
play will read "DEL" for a few seconds.
1
to the diagnostic scales
®
symbol in the LC-
® 19
range. Data
®
and
2
GB/CY
®
13