Connecting The Audio Cable; Component Video - Clatronic dvd 797 Bedienungsanleitung

Fig. 2/10
Fig. 2/12
Fig. 2/11

Connecting the Audio cable

05-DVD 797_GB.indd 39 05-DVD 797_GB.indd 39

Component Video

Connection using a Component Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug each of the three jacks into the corresponding sockets on the DVD-
Player.
2. Plug the jacks into the corresponding socket on your playback device.
Press the VIDEO button (Fig. 3/1) repeatedly to select between the settings
„P-Scan", „RGB", „S-Video" and „Component" for the connected playback
device. Please see the operating instructions of the connected device for the
correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your playback device.
Composite-Video
Composite-Video is used to transmit both Video data.
1. Plug the Composite-Video jack into the socket on the back of the player.
2. Plug the Composite-Video jack into the corresponding socket on your play-
back device.
You can choose from two transmission methods for audio signals.
You must generally choose fi rst whether you would like to have the sound coming
from your TV, or through a Stereo-Amplifi er. The Audio cable must then be con-
nected to the TV or an amplifi er accordingly.
NOTE:
If your amplifi er is equipped with a digital output, you should use the amplifi er.
You will experience a much better audio quality, and the installation is much
easier.
Starting up Themen
39
18.08.2008 15:58:19 Uhr 18.08.2008 15:58:19 Uhr